A castle nut uses slots around its top to accept a split pin through a cross-drilled bolt or shaft. The pin provides a mechanical stop against nut rotation after the nut has been set to the required position.
DIN 935-1
Stainless Steel Castle Nut
Key Specifications
Standards
DIN 935-1 for slotted and castle nuts. DIN EN ISO 1234 is the reference for split pins.
Grades (Material)
A2 and A4 stainless steel options. Confirm the required nut property class.
Strength Classes
-
Threads
Metric coarse or fine, as specified.
Sizes
M6–M24 representative stainless catalogue range.
Lengths
-
Head
Hex body with slots for a split pin through a cross-drilled bolt or shaft.
Marking
-
Certificates
Compliance
Choosing the Right Stainless Steel Castle Nut
Use a castle nut for a shaft, linkage or machinery joint designed for split-pin retention. Match the nut height and slot width to the cross-hole and pin size.
Mechanical Properties (Guide)
The pin acts as a stop against nut rotation. Set the specified preload or end play before fitting the pin, and align the slot within the equipment procedure’s adjustment limits.
6000+ Products
Trusted by 2000+ Clients
40+ Years of Experience
Exporting to 12+ Countries





What We Do
From a vast manufacturing facility situated in GIDC Wadhwan, Gujarat to strategic
sales offices in Mumbai and Chennai, we design, produce, and deliver a wide array of stainless steel
fasteners, hex bolts, machine screws, socket screws, washers, nuts, self‑tapping screws, threaded rods,
anchor fasteners, and specialty material products, engineered for demanding sectors like petrochemicals,
pharmaceuticals, automotive, and construction.
Our Legacy & Mission
Founded on a vision of precision and service, we have consistently expanded our
capabilities to meet evolving industrial needs. Our commitment to "We Deliver Quality" reflects in the
long-term relationships we build with clients across India and abroad.
Frequently Asked Questions
Will it lock on an undrilled bolt?
The locking arrangement needs a matching cross-hole, the correct pin and an aligned slot.
Should I back off to align the slot?
Follow the equipment procedure for allowable adjustment. Bearing assemblies and clamp joints can require different sequences.
Can I reuse the split pin?
Fit a new pin of the specified diameter and material after removal.
contact us
Partner with us for precision, quality, and reliability. Reach out and let's start building together.
